-
Mechanical press Schuler 160
Manufacturer: SchulerModel: SE2160-10-200Construction year: 1980Pressure force: 160 t
Equipped with:
– sheet metal reel
– straightener
– schrottschere
– test equipment
– parallel lifting device according to DIN
– light barriers -
Mechanical Press Voronezh KA 3540
Make: Voronezh
Model: KA 3540
Year: 1988Voronez KA 3540 Single Action 1000 ton
Tonnage: 1000 tons (10,000 kN)
Stroke Size: 400 mm
Platen Size: 3150 x 1800 mm
Number of Ram Strokes: 20 / min.Shut Height: 1060 mm
Bolster plat-to-ram adjustment stroke: 320 mm.Ram Dimensions: 3150 x 1700 mm.
Bolster plate thickness: 260 mm.
Overall Dimensions: 5150 x 4700 x 7830 mm (w x l x h – above floor)
Weight: 200 ton approx. -
Mobile harbor crane Liebherr LHM 150
y.o.m./ Bauj 1999
working hours appr/betr.std. ca.. ca.12500 h
max. capacity /max. Kapazität . 36 to
four rope grab/mit 4 Seilgreifer 24 to
motor grab / mit Motorgreifer 30 to
containers ./hour / container /h 25 unit
outreach min/reichweite 6m
max/reichweite 32 m
hoisting height min. radius/ Hubhöhe 34m
max. radius 17m
height below quay /höhe über wasserkante ca.16 m
engine/ motor Liebherr Diesel D9408 TI-E 8 Zylinder
generator /generator 200 kVA
weigth total /gesamtgewicht 145 to
length of undercarriage /Fahrwerkslänge 15,90 m
widthe Breite 5,0 m
height (errected tower )/Höhe mit ausgefahr. Turm 20,0 m
The machine is in good condition and always serviced by Liebherr.
Maschine ist in technisch und optisch gutem Zustand und ständig von Liebherr gewartet.
-
Molding line
Carasteristic of molding line: producer: Found Equip,(I), manufactered year: 2010, running only in trial, 5 month, excelent condition, – capacity: 18 moulds /h, – Frame dimensions: 1400 * 900 * 300 + 350mm, – Clamping system: Multi-piston head, + Mixer with a capacity of 35T / h, mixer RTM 1500 and autorotocontrol RTC106PB, – The site allows the use of a sand of contact and a sand of filling;
– the number of molding boxes : 156 pairs ( 156 molding boxes 1400*900*300 mm and 156 molding boxes 1400*900*350 mm)
– the number of palet cars : 163
– vent hole piercing device : the piercing device allows to realize 2 pouring holes and 15 vent holes : Please find attached the drilling tools drawings.
– Pattern plate carrier : there are 4 pattern plate carriers.
– Control system : PLC SIEMENS MP377 touch screen 15” for the molding line and PLC SIEMENS S7 for the mixer
– Green sand plant : the mixer (SCOVAL RTM 1500) , the weigh hopper, the 2 conveyors that convey the sand to the molding machine, and the 2 hoppers (one for contact sand) above the molding machine (capacity 4 tons) were installed in 2010 with the molding line. There is no cooling system. The capacity of the main sand tank is cca 260 m3
– Shakeout Length : 5750 mm , Width : 1500 mm. Please find attached drawing
– Rotating drum :
– Power demand : 150 KW
– the number of molding boxes : 156 pairs ( 156 molding boxes 1400*900*300 mm and 156 molding boxes 1400*900*350 mm)
– the number of palet cars : 163
– vent hole piercing device : the piercing device allows to realize 2 pouring holes and 15 vent holes : Please find attached the drilling tools drawings.
– Pattern plate carrier : there are 4 pattern plate carriers.
– Control system : PLC SIEMENS MP377 touch screen 15” for the molding line and PLC SIEMENS S7 for the mixer
– Green sand plant : the mixer (SCOVAL RTM 1500) , the weigh hopper, the 2 conveyors that convey the sand to the molding machine, and the 2 hoppers (one for contact sand) above the molding machine (capacity 4 tons) were installed in 2010 with the molding line. There is no cooling system. The capacity of the main sand tank is cca 260 m3
– Shakeout Length : 5750 mm , Width : 1500 mm. Please find attached drawing
– Rotating drum :
– Power demand : 150 KW
A) DISA 2032 1x DMM with Pattern changer 1x SSU with Sand hopper,
Complete PMC 18 m, PMC Drive, Hydraulic power pack,
PLC control unit S5
PMC covers and dust captures
1x SBC 16 m 1x Shakeout 1x vibratory conveyor 1x casting conveyor pattern holders 1x Cyclone Sound protect cabine B) Prespour furnace ASEA Pouring machine body 1x Power panel and hydraulic packs 1x Control and operating panels 1x Transformer 1x Cooling system 1x Set of spare formers 1x stopper system unit Set of rails
C) Sand Plant 10x sylo/bunker 10x sylo discharge belt conveyors
1x collecting belt conveyour
1x dosing belt to mixer
1x Feeder hopper of mixer
1x Sand Mixer (L 450 x W 310 x H 250 cm)
1x Moister control system
1x prepared sand belt
1x second transverse belt to SSU
1x return sand belt to cooler
1x Sand cooler, cyclone, blower, water dossing system, stack 1x additive dosage 1x Polygonal screen -
Radial forging machine RKS 10
YOM: 1988
Number of hammers: 4
Max. forging force per hammer: 125 t
Number of hammer strokes: 1.000/min
Max. forging diameter: 45 mm
Max. workpiece length: 900 mm
-
Rotary table Skoda model S80B
clamping surface: 4000 x 3550 mm
workpiece load (max): 80000 kg
w-axis traverse: 2000 mm
rotation: 360° -
Sheet Roll Forming Line SUNDWIG
1. Weight of about 180 tons
2. Input sheet width 70 mm ….. 615 mm
3. The strip thickness 2.5 mm …… 6 mm
4. The speed profiling 7 … 67 m/min.
-
Sheet Stamping Press Ravne DE 315
Manufacturer: Ravne
Model: DE 315
Year: 1990
Specification:
Double crankshaft mechanical press
Capacity: 315 tons
Slider stroke: 400mm
Number of strokes per minute: 18
Table dimensions: 2500 x 1400 mm
Slider dimensions: 2500 x 1400 mm
Distance adjustment between table and slider: 250 mm
Distance between table and slider in its
lower and upper adjustment position: 700 mm
Force of hydro cushion: 8 tons
Stroke of hydro cushion: 155 mm
Weight: 75 tons
-
Table type special boring machine CNC model LR393MF3
Manufacturer: Russia
Model: LR 393 MF3
Year: 1992
Year of overhauling: 2006
Condition of the machine:
– electromechanical equipment is in operating condition
– control system needs to be repairedBasic technical data
Work piece max dimensions, mm:
length 5000
width 3000
hight 2200
Inner machining surface max, mm: 1050
Work piece max weight, kg: 12500
Cutting tool max diam., mm:
– Milling cutter max. diam.: 250
– Tool holder max. diam: 1050
Max. travel Х, mm (see the scheme) 6000
Max. travel (Y,V), mm (see the scheme) 1500
Max. travel Z, mm (see the scheme) 2250
Max. travel W, mm (see the scheme) 1000
Running accuracy, micron 1,0
Positional accuracy, micron 25
Quantity of controllable axis, pieces 6
Quantity of simultaneously controllable axis, pieces 3
Spindel rotational speed, rotations per minutes 5…1600
Cutting feed, mm per minute 3…3000
Speed of rapid-tool motion, mm per minutes 5000
Main drive power, kW 45
Total capacity of all electromotors, kW 90
Overall dimensions, mm:
length 15500
width 12000
height 5250
Total weight, kg 76000 -
Vertical turning lathe KOLOMNA 1540
New in: 1975
Description:
Workpiece max. diameter: 4000 mm
Workpiece max. height: 2000 mm
Faceplate diameter: 4000 mm
Vertical ram stroke of vertical slide: 1250 mm
Horizontal stroke of vertical slides: 2350 mm
Corner of supports turn, deg. -15 +40
Workpiece weight: 63000 kg
Cutting force on slides, kN 100
Faceplate speed range: 0,52 – 48,7 rpm
Main drive: 63 kW
Machine weight: 105000 kg -
Vertical turning lathe Sedin 1516 CNC
Made: 1997
Parameters:
CNC system: Sinumerik 840
Table diameter: 1620 mm
Number of tool holders: 1
Max. circulating diameter: 1820 mm
Max. tool holder height: 1300 mm
Max. slider extension: 850 mm
Number of tools in the tray: 10 -
Vertical turning lathe TOS Hulin SKJ 20A
YOM: 1986
Manufacturer: TOS HULIN
Made in: CzechoslovakiaSpecification:
Table diameter: 2000 mm
Max. work-piece:
-Diameter: 2400 mm
-Height: 1500 mm
-Weight: 10000 kg
Machine dimensions:
-Length: 6280 mm
-Width: 6600 mm
-Height: 4800 mm
Machine weight: 39 tons
