-
Gear grinding machine ZSTZ 12
WMW – gear grinder ZSTZ12 (1250 mm) – 1990
– change gears
– under power
– outside Diameter: 1250 mm
– max Face Width: 430 mm
– min Module: 2
– max Module: 25 (34) – the 34 is special execution
– min Outside Diameter: 80 mm
– max Outside Diameter: 1250 mm
– max angle degree: 45
– min/ max tooth number: (5) 12/600 – +
– table diameter: 1025 mm
– table hole: 410 mm
– table hole depth: 500 (900) mm
– T slots in table: 8 (width 22 mm)
– max job weight: 6000 kg
– machine weight: ca 30000 kg
– place requirement: L 6565 x W 7035 x H 3650 mm -
Gear Hobber MODUL ZFWZ 2000/3
Brand: MODUL Model: ZFWZ 2000/3 Type: Gear Hobbers Year: 1981 Specifications
Specification:
Max diameter of gear without tailstock 2100 mm
Max diameter of gear with tailstock 1450 mm
Max face of gear 1060mm
Max module with hobbing head 22
Max/ Min center distance 1240/150 mm
Min number of teeth 10
Max pressure angel 45 deg
Table dia / number of slots 1800 mm/12
Bore in table / length 600/800 mm
Max dia of hob / length 300/330 mm
Max weight of workpiece 15000 kg
Accessories:
Standard milling head
Tailstock (no clamping)
Set of gear supports (shoes)
Set of arbors
Set of change gears
-
Gear hobbing machine Kolomna model 5A342
Gear hobbing machine model 5A342
Manufacturer: KOLOMNA (Russia)
Year of manufacture: 1970
Main technical data:
Max gear diameter: 2000 mm
Max module: 25
Table diameter: 1800 mm
Maximum table load: 10 t
Main motor power: 14 kW
Overall dimensions(LxWxH): 6910 x 2990 x 3462 mm
Weight of the machine: 31800 kg
Accesories:
Set of change gears ab. 80pcs;
Aditional hobbing head tooth by tooth
One arbor
2pcs. supports
-
Gear Shaping Machine LORENZ LP 2500
– MACHINE IS UNDER POWER AND VISIBLE
– IN EXCELLENT CONDITIONS
– ONLY ONE MACHINE AVAILABLE
SPECIFICATIONS:
Max Pitch Transverse Module: 19 mm
Normal Module: 16 mm
Max PCD: 2500 mm
Min PCD: 200 mm
Max Face Width: 600 mm
WORMWHEEL FOR COMPONENT ARBOR
Module: 6 mm
Number of Teeth: 350
PCD: 2100 mm
WORMWHEEL FOR CUTTER
Module: 4 mm
Number of Teeth: 14
PCD: 560 mm
STANDARD ACCESSORIES
1 set of index change gears (64 gears)
1 work support for components from 600 – 1250 mm diameter
1 work support for components from 1250 – 2500 mm diameter
1 counter support for components from 600 – 2500 mm diameter.
SPECIAL ACCESSORIES
Center setting gauge
Special cutter head for cutting internals
Spur guide
-
Harbor Crane FANTUZZI – REGGIANE
4 identical cranes for sale
Total reconditioned year 2011 and stop work.
Complete of Spreader and some optional
Capacity : 35 ton to 25 m or 25 ton to 35 mTechnical Data: See below
-
Heavy Duty Lathe Kramatorsk KZTS KZ 16264 CNC
PRODUCT SPECIFICATIONSCAPACITY:MAXIMUM SWING OVER BEDWAYS 3683 MMMAXIMUM PART DIAMETER 3683 MMMAXIMUM TURNING DIAMETER W/BYPASS 3658 MMMAXIMUM SWING OVER CARRIAGE 2591 MMDISTANCE BETWEEN CENTERS 16000 MMWEIGHT CAPACITY WITH STEADY RESTS 100068 KGWEIGHT CAPACITY WITHOUT STEADY RESTS 30020 KGSPINDLE SPEEDS, VARIABLE TO 100 RPMTAILSTOCK DIAMETER 500 MMLONGITUDINAL FEED RANGES (2) 0.67 MM/REVRAPID TRAVERSE TAILSTOCK & SUPPORTS 3581 MM/MINMAXIMUM TOOL SIZE 64 MM X 80 MMMAXIMUM DISPLACEMENT OF CUTTER 12395 MM R / 11582 MM LACCURACY OF PROCESSED SURFACES .024892 MMPOSITIONAL ACCURACY OF Z-AXIS .24892 MMPOSITIONAL ACCURACY OF X-AXIS .24892 MMMETRIC THREADING RANGE 2-96 MMINCH THREADING RANGE 3.3-12 TPISPINDLE MOTOR 112 KWFEED MOTORS 7 KWTOTAL POWER INSTALLED MOTORS 138 KWMACHINE FOOTPRINT 26340 MM X 5740 MMMACHINE HEIGHT 3937 MMMACHINE WEIGHT 165000 KGEQUIPPED WITH:FANUC 180I-T CNC CONTROLS RETROFIT IN 20042-CARRIAGES W/ INDEPENDENT OPERATORS STATIONS W/ CNC CONTROLS(2) 4-JAW CHUCKS4-WAY BED CONSTRUCTIONPART WEIGHT METER ON TAILSTOCKCARRIAGE WILL PASS TAILSTOCK3-STEADY RESTSFOLLOW RESTHEAVY DUTY MEEHANITE CASTINGS112 KW SPINDLE DRIVE 440/3-PHASE/60 CYCLENOTE:MACHINE WAS BUILT IN 1999 AND RETROFIT TO CNC IN 2004 FOR USE IN A FINISHQUALITY TURBINE REPAIR FACILITY. -
Heavy duty lathe Somua 1600×11000
Year of construction: 1979
Technical specifications:
Turning length: 11000 mmTurning diameter over bed: 1600 mm
New electro/electronics in 2009 machine modernization
Digital
Driven tailstock
Flat band conveyor to transport chipsWeight: 140000 Kg
-
Heavy duty VTL Kolomna 1532T F1
New 1990
Swing Max. – 3200 mm
Max. height – 2000 mm
Table diameter – 3200 mm
Max. weight of workpiece – 40t
Max. cutting force – 63000 kg
Summary cutting force – 10000 kg
Table RPM – 0,66 – 62,1
Main drive – 63 kW
Height of machine – 6000 mm
Length – 5100 mm
Width – 9300 mmWeight – 90t
-
Horizontal boring machine SKODA W200HC
Year of production: 1990Spindle working diameter: 200 mmTravel X-axis: 8000 mmTravel Y-axis: 3150 mmSpindle speed: 1 – 800 / min.Spindle travel (W): 2000 mmRam travel (V): 1600 mmSpindle taper: ISO 60Main power: 75 kWSkoda boring machine is in good condition. It is equipped with rotary table Skoda-Tos E25 – load capacity 25t – clamping surface 2000mm x 2000mm, milling head, two T-slot floor plates 400mm x 1885mm x 11200mm (one piece: 400mm x 1885mm x 5600mm), lifting device on the machine stand – load capacity 750 kg.
Weight of individual units:W200HC: ca 95000kgW200HC+E25+two T-slot floor plates: ca 120000kgE25: ca 10000kg -
Horizontal boring machine SKODA W250H
YOM: 1984
Manufacturer: SKODA
Made in: CzechoslovakiaDesigned for processing of large sized work-pieces in conditions of single and mass production. It is possible to perform on the machine boring, drilling, coredrilling, cutting of internal and external threads, grinding of cylindrical surfaces, undercutting of ends, cylindrical and face milling.
Specification:
Spindle diameter: 250 mm
Stroke on the:
-X-axis: 5500 mm
-Y-axis: 4150 mm
-Z-axis: 2000 mm
-W-axis: 1600 mm -
Horizontal boring machine TOS WHN 130 CNC
Year: 1999
Specifications:
System Heidenhain TNC 426
Working range
Spindle diameter 140 [mm]
Taper in the spindle ISO 50
Table transverse adjustment (X) 3000 [mm]
Vertical headstock adjustment (Y) 2000 [mm]
Vertical travel (Z) 1250 [mm]
Spindle stroke (W) 560 [mm]
2x Clamping surface 1800 x 1600 [mm]
Speed range 10 – 2500 [rpm]
Main motor output 37,0 [kW]
Max. workpiece weight 8000 [kg]
Accessories
Tool changer for 60 pcs
Tool cooling
Chip conveyor -
Hydraulic Forging Press PA1345 (3200t)
DESCRIPTION:
Hydraulic Forging Press PA1345 (3200 To) with 4 columns. The press stopped working on December 2012. It is on the original location. The electric and hydraulic is not available. It can be inspected anytime and it is available immediately. There are available 4 spare new tie rods and also two new cylinders. Several other spare parts are available.Nominal power, tf – 3200
Nominal power of pushing cylinder, tf – 32
Maximum skid stroke, mm – 2000
Distance between table and skid (in upper position), mm – 4000
Distance between columns : -front, mm – 3000 -side,mm – 1200
Nominal force of the cylinders moving the table, tf – 95
Nominal travel of the table, mm – 5000
Table dimensions, mm – 6000×2400
Nominal power of the extractor, tf – 165
Extractor travel: -total,mm – 1300 -below table,mm – 590
Number of working strokes per minute – 10
Number of finishinf strokes per minute – 80-90
Working liquid pressure from pump installation, kgf/cm2 – 320
Dimensions, mm : Left to right – 11.800 -front to back – 24.800 Height, mm : -with extractor – 16.840 without extractor – 14.160
Weight, kg: -of the press, aprox. – 465.900 -of the complete installation, aprox. – 565.000 All documentation is available.
